- Economical alternative to contact cement
- Formulated to minimize "bleed-through"
- Moderate speed of set
- No harmful vapors
- Safe - nonflammable
- MSDS Information can be found here.
|Type: Polyvinyl acetate emulsion
||Calculated VOC: 2.0 g/L
||Weight/gallon: 9.2 lbs
||Chalk temperature*: Approx. 50°F
|Dried film: Dark Brown
||Freeze/thaw stability: Stable
|Viscosity: 4,500 cps
|Storage life: 6 months if tightly closed containers at 70°F.
|*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
Open assembly time:
15 minutes (70°F./50%RH)
Total assembly time:
15-20 minutes (70°F./50%RH)
Minimum required spread:
Approximately 6 mils or 250 square feet per gallon.
Required pressure application:
100-250 psi, depending on substrates.
Methods of application:
For most consistent coverage a mechanical spreader is recommended.
Damp cloth while glue is wet. Scrape off and sand dried excess.
Titebond Cold Press for Veneer is specifically designed for veneering and is not suited for other types of assembly applications. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use.NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.
Available Shipping Options:
Methods NOT Available:
- UPS Ground
- UPS 3 Day Select
- UPS 2nd Day Air
- UPS Next Day Air
- USPS Flat Rate (All box sizes)
This item ships directly from the manufacturer. Please see our shipping policy page
for more information regarding our shipping terms.
NOTE: A lead time of 10 Days may apply to your order! This time frame is in addition to shipping time.
The map below indicates standard UPS Ground Shipping time.