#8-32 x 1/2" Truss Head, Phillips/Slot Recess, Machine, Zinc (pack of 100)
$1.72
- Buy 10 for $1.32 each and save 23%
- Buy 100 for $1.15 each and save 33%
- Buy 300 for $1.07 each and save 38%
15 left on hand
SKU
30672
MPN
MTCM0832012Z
MFR:
Deerwood Fasteners
Excess Item
Discontinued by MFR
This item is limited to quantity on hand, and will not be restocked once inventory is depleted.
*Break-Away screws are notched at 1/4" increments.
Measurement: #8-32 x 1/2"
Thread Type: Machine Screw
Head Type: Truss Head
Recess Type: Philips-Slot
Variations:
Finish: Zinc
Additional screw lengths are available
Part # | Type | Length | Gauge |
---|---|---|---|
30672 | Standard | 1/2" | #8-32 |
30676 | Standard | 5/8" | #8-32 |
30680 | Standard | 3/4" | #8-32 |
30684 | Standard | 7/8" | #8-32 |
30688 | Standard | 1" | #8-32 |
30692 | Standard | 1-1/8" | #8-32 |
30696 | Standard | 1-1/4" | #8-32 |
30700 | Standard | 1-3/8" | #8-32 |
30704 | Standard | 1-1/2" | #8-32 |
30708 | Standard | 1-5/8" | #8-32 |
30712 | Standard | 1-3/4" | #8-32 |
30724 | Break-Away | 1-3/4" | #8-32 |
30720 | Standard | 2" | #8-32 |
30728 | Break-Away | 45mm | M4 |
Note: #8-32 screws are most commonly used for decorative hardware which generally has around 3/8" to 1/2" of screw depth depending on the piece. Typically decorative hardware comes with 1" screws that may not be long enough for most drawer box/face construction. If your drawer box + drawer face is greater then 3/4" you will most likely need to purchase screws that are longer then 1".
Typical Ground Transit Time:

Shipping Details:
- Normal processing time for all orders is one business day unless the item is flagged as a special order or has a noted lead time. Unforeseen events may cause delays (such as closed roads, weather, war, acts of God, etc). Please note that ship times are estimates only and are not guarantees.
Write Your Own Review