11/64" Adjustable Countersink for #8 Screws
$7.73
3 left on hand, additional units may have lead time
SKU
8060008
MFR:
Whiteside Machine
Screw Size: #8
Drill Size: 11/64" (See chart below)
Countersink Diameter: 3/8"
Large Diameter: 1/2"
MFR:
Whiteside Machine
These 82° Countersink Heads are designed to slip over the drill bit and affix with dual set screws into the flutes. Adjust the drilling length by sliding the head up or down the bit. Use to countersink holes in wood, plastic, or aluminum for flat head screws.
Counterskink Chart
Carbon Steel # | High Speed Steel # | Sink Diameter | Jobber Drill | Taper Drill | Drill Dia. | Screw Size |
---|---|---|---|---|---|---|
8060004 | 8070004 | 3/8" | 8061094 | 7/64" | #4 | |
8060005 | 8070005 | 3/8" | 8061094 | 1/8" | #5 | |
8060006 | 8070006 | 3/8" | 8061416 | 8071416 | 9/64" | #6 |
8060007 | 8070007 | 3/8" | 8061567 | 5/32" | #7 | |
8060008 | 8070008 | 3/8" | 8061728 | 8071728 | 11/64" | #8 |
8060009 | 8070009 | 3/8" | 8061879 | 3/16" | #9 | |
8060010 | 8070010 | 1/2" | 8062010 | 8072010 | 13/16" | #10 |
8060011 | 8070011 | 1/2" | 8062212 | 7/32" | #12 | |
8060012 | 8070012 | 1/2" | 8062514 | 8072514 | 1/4" | #14 |
Typical Ground Transit Time:
Shipping Details:
- Normal processing time for all orders is one business day unless the item is flagged as a special order or has a noted lead time. Unforeseen events may cause delays (such as closed roads, weather, war, acts of God, etc). Please note that ship times are estimates only and are not guarantees.
Write Your Own Review