Titebond III Ultimate Wood Glue - 16 Oz

$8.50
18 left on hand, additional units may have lead time
SKU
T1414
MPN
1414
MFR:
Franklin International

Designed for interior and exterior applications (Waterproof).
MPN
1414
MFR:
Franklin International
ea

Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time, and lower application temperature. Titebond III is non-toxic, solvent free, and cleans up with water (safer to use than traditional waterproof wood glues). It provides strong initial tack, sands easily without softening, and is FDA approved for indirect food contact (cutting boards). Ideal for both interior and exterior applications.

  • Passes ANSI/HPVA Type I water-resistance
  • Waterproof formula that cleans up with water
  • Superior strength - Strong initial tack
  • Designed for interior and exterior applications
  • Longer open assembly time
  • Lower application temperature
  • Unaffected by finishes
  • FDA approved for indirect food contact (Non-toxic)
Physical Properties (Typical)
  • Type: Advanced Proprietary Polymer
  • State: Liquid
  • Color: Tan
  • Dried film: Light brown
  • Solids: 52%
  • Viscosity: 4,200 cps
  • pH: 2.5
  • Calculated VOC: 0.0105 g/L
  • Weight/gallon: 9.22 lbs.
  • Chalk temperature*: Approx 45°F
  • Flash-point: >200°F
  • Freeze/thaw stability: Stable
  • Storage life: 24 months in tightly closed containers below 75°F
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
Application Guidelines
  • Application Temperature: Above 47 °F
  • Open assembly time: 8 to 10 minutes (70°F. / 50% RH)
  • Total assembly time: 20 - 25 minutes (70°F. / 50% RH)
  • Minimum required spread: 6 mils (typical), or 250 square feet per gallon.
  • Required clamping pressure: Enough to bring joints tightly together (generally 100-150 psi for softwoods, 125-175 psi for medium woods, and 175-250 psi for hardwoods)
  • Methods of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader, or brush.
  • Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Bonding Strength (ASTM D-905 Test with Hard Maple)
Temperature Strength Wood Failure
Room Temperature 4,000 psi 57%
150°F. Overnight 800 psi 0%
Limitations
  • Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exterior doors or exotic and oily woods, please contact Titebonds Technical Support Team at 1-800-347-4583. Read MSDS before use. Keep from freezing. Keep out of reach of children.
Available Sizes
Part # Size UPC Case Qty.
1412 4 Oz. Bottles 037083014129 12
1413 8 Oz. Bottles 037083014136 12
1414 16 Oz. Bottles 037083014143 12
1415 1 Quart Bottle 037083014150 6
1416 Gallon Jug 037083014167 2
14109 2.15 Gallon ProJug 037083141092 1
1416 5 Gallon Bucket 037083014174 1
1418 55 Gallon Drum N/A 1

Typical Ground Transit Time:

Shipping Map

Shipping Details:

  • Normal processing time for all orders is one business day unless the item is flagged as a special order or has a noted lead time. Unforeseen events may cause delays (such as closed roads, weather, war, acts of God, etc). Please note that ship times are estimates only and are not guarantees.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2024 Wood Stock Supply, Inc.