- Ready-to-use form
- Ideal for fine furniture repair
- Excellent sandability
- Excellent creep-resistance
- Can be used to create a "crackling effect" on wood
- Slow set allows precise assembly
| Type: Natural protein emulsion |
Calculated VOC: N/A |
| State: Liquid |
Weight/gallon: 9.6 lbs |
| Color: Amber |
Flashpoint: >200°F. |
| Dried film: Translucent |
Freeze/thaw stability: Stable |
| Solids: 52% |
pH: 6.5 |
| Viscosity: 4,000 cps |
|
| Storage life: 12 months if tightly closed containers at 75°F. |
|
| |
Application temperature: Above 50°F.
Open assembly time: 10 minutes (70°F./50% RH)
Total assembly time: 20-30 minutes (70°F./50%RH)
Minimum required spread: Approximately 6 mils or 250 square feet per gallon
Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Methods of application: Can be applied by roller or dip spreader, pressurized oil cans, plastic applicators, brush or stick.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Titebond Liquid Hide Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. KEEP FROM FREEZING.
Available Shipping Options:
- UPS Ground
- UPS 3 Day Select
- UPS 2nd Day Air
- UPS Next Day Air
- International
Methods NOT Available:
- USPS Flat Rate (All box sizes)
This item ships directly from the manufacturer. Please see our
shipping policy page for more information regarding our shipping terms.
NOTE: A lead time of 3 to 5 Days may apply to your order! This time frame is in addition to shipping time.
The map below indicates standard UPS Ground Shipping time.
wtitebond-liquid-hide-glue-8-oz-5013-franklin-international