Hettich 5632 Rear Mounting Bracket
$1.96
- Buy 200 for $1.76 each and save 10%
115 left on hand, additional units may have lead time
SKU
1134110
MFR:
Hettich
This rear mounting bracket is especially designed for the Hettich 5632 slides in face frame construction as well as applications not using a full center panel. Dimensions: 1" x1 7/8" x 3 1/2"
- Precision full extension drawer slides with pull-out stop and roll-out guard.
- Using the release lever the drawer can be removed from the runner and re-attached with ease.
- High lateral stability with smooth runner action.
- For use in drawers with grooved, rebated, or loosely fitted drawer bottoms.
- Loading capacity conforms to EN 15338, Level 1 spec.
Installation dimensions
| Use Part # | Drawer Length | Min. Cabinet Depth | b1 | b2 | b3 | b4 | b5 | C |
|---|---|---|---|---|---|---|---|---|
| 0 073 276 | 10" | 10.25" | 7.55" | |||||
| 0 073 277 | 12" | 12.25" | 3.77" | 9.25" | ||||
| 0 073 278 | 14" | 14.25" | 3.77" | 11.49" | ||||
| 0 073 279 | 16" | 16.25" | 3.77" | 3.77" | 13.46" | |||
| 0 073 280 | 18" | 18.25" | 3.77" | 5.03" | 15.43" | |||
| 0 073 281 | 20" | 20.25" | 3.77" | 5.03" | 2.51" | 17.4" | ||
| 1 071 898 | 22" | 22.25" | 3.77" | 5.03" | 2.51" | 1.25" | 1.25" | 19.37" |
| 0 073 283 | 24" | 24.25" | 3.77" | 5.03" | 3.77" | 1.25" | 1.25" | 21.33" |
| 0 073 284 | 26" | 26.25" | 3.77" | 5.03" | 6.29" | 1.25" | 1.25" | 23.3" |
| 0 041 355 | 28" | 28.25" | 3.77" | 5.03" | 7.55" | 1.25" | 1.25" | 25.27" |
Recommended Screws
| Part # | Head Type | Thread Type | Length | Finish | Drive | Gauge |
|---|---|---|---|---|---|---|
| 30635 | Truss Head | Deep Thread | 1/2" | Zinc | Philips | #6 |
Typical Ground Transit Time:
Shipping Details:
- Normal processing time for all orders is one business day unless the item is flagged as a special order or has a noted lead time. Unforeseen events may cause delays (such as closed roads, weather, war, acts of God, etc). Please note that ship times are estimates only and are not guarantees.
Write Your Own Review