Square Bar Pull (Oil Rubbed Bronze) - 160mm

• Type: Square Bar Pull
• Finish: Oil Rubbed Bronze
• Hole Spacing: 160mm
• Projection: 1-3/8"
• Length: 6-11/16"
• Weight: 0.31lbs.
• Note: Comes with two pairs of screws: 1" & 1-3/4" breakaway.

Why Pride Industrial?

• Offers a variety of sleek, contemporary designs that go with any kitchen cabinet or dresser drawer.
• Come in a variety of different finishes that complement any project, including satin nickel, oil rubbed bronze, matte black, and more.
• Provides reliable durability and quality you can count on.
• Economical cost, providing you with the best value for your hard-earned money.

Visual Size Guide

Decorative hardware generally has around 3/8" to 1/2" of screw depth on the piece itself. The 1" screws provided with the hardware may not be long enough for typical drawer box/face construction. If your drawer box + drawer face is greater than 3/4" you will most likely need longer screws. If this is the case then check the table below and let us know in the comments section on your order what size you will need for your application and we will swap them out for free.

Part #	Type	Length	Gauge
30692	Standard	1-1/8"	#8-32
30696	Standard	1-1/4"	#8-32
30700	Standard	1-3/8"	#8-32
30704	Standard	1-1/2"	#8-32
30708	Standard	1-5/8"	#8-32
30712	Standard	1-3/4"	#8-32
30724	Break-Away	1-3/4"	#8-32
30720	Standard	2"	#8-32

*1-1/2" screws are the most common for drawer boxes.