Titebond Speed Set Wood Glue - Gallon
$29.08
4 left on hand, additional units may have lead time
SKU
T4366
MPN
4366
MFR:
Franklin International
An easy to cleanup wood glue that is visible under black light.
MPN
4366
MFR:
Franklin International
Titebond Speed Set Wood Glue is an extremely fast-setting, high solids PVA adhesive. It provides exceptional gap filling properties developing a bond stronger than the wood itself. This product offers excellent sandability, unaffected by finishes, and increases productivity through its shorter clamp time with no increase in viscosity. Titebond Speed Set is non-toxic and cleans up with water.
- Extremely fast set - 15 minute clamp time
- Visible under black light
- Heat resistant - Sands easily
- Excellent strength & durability
- Unaffected by finishes
- Easy cleanup with water
Physical Properties (Typical)
- Type: Aliphatic resin emulsion
- State: Liquid
- Color: White
- Dried film: Translucent
- Solids: 60%
- Viscosity: 3,600 cps
- pH: 4.7
- Calculated VOC: 5.6 g/L
- Weight/gallon: 9.3 lbs.
- Chalk temperature*: Approx 59°F
- Flash-point: > 200°F
- Freeze/thaw stability: Not stable
- Storage life: 24 months in tightly closed containers below 75°F
Application Guidelines
- Application Temperature: Above 59 °F
- Open assembly time: 2 to 4 minutes (70°F. / 50% RH)
- Total assembly time: 8 to 10 minutes (70°F. / 50% RH)
- Minimum required spread: 6 mils (typical), or 250 square feet per gallon.
- Required clamping pressure: Enough to bring joints tightly together (generally 100-150 psi for softwoods, 125-175 psi for medium woods, and 175-250 psi for hardwoods)
- Methods of application: Any method can be used for spreading as long as Open and Total Assembly Times are met (see above).
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Bonding Strength (ASTM D-905 Test with Hard Maple)
Temperature | Strength | Wood Failure |
---|---|---|
Room Temperature | 4,178 psi | 77% |
150°F. Overnight | 1,527 psi | 10% |
Limitations
- Titebond Speed Set Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 59°F. Agitate adhesive monthly to reduce product settling. Adhesive is extremely fast setting. It is important to follow Assembly Time recommendations. Minimum clamp-time is 15 minutes. Longer clamp times may be beneficial. Read MSDS before use. Keep from freezing. Keep out of reach of children.
Typical Ground Transit Time:
Shipping Details:
- Normal processing time for all orders is one business day unless the item is flagged as a special order or has a noted lead time. Unforeseen events may cause delays (such as closed roads, weather, war, acts of God, etc). Please note that ship times are estimates only and are not guarantees.
Write Your Own Review