Titebond II ProJug (2.15gal)
An easy to cleanup wood glue that is designed for exterior use.
Professional woodworkers, handing glue just got easier! Introducing the new 2.15-Gallon PROJUG from Titebond.
OK, first "Why 2.15-Gallons?"; As with any purchase of consumer goods, larger quantities are typically a better value than smaller ones. So Titebond has developed this new container that has the extra capacity just to ensure full two-gallon fill. So woodworkers can expect to pay slightly less per gallon versus the one-gallon bottles.
The PROJUG’s new custom dual-handled design makes it comfortable and easy to hold while refilling bottles or applying glue to large jobs. These PROJUGS are a perfect alternative to keeping the traditional 5-gallon bucket on hand to draw from as they are much easier to handle. The strategically positioned vent ensures a smooth flow of glue from the container for better control. Once you try them out you may never go back to 5 gallon buckets again!
- First one-part wood glue to pass ANSI Type II water-resistance
- Designed for exterior use
- Excellent sandability
- Unaffected by finishes
- Ideal for radio frequency (R-F) and hot press gluing systems
- FDA approved for indirect food contact
- Easy cleanup with water
- MSDS Information can be found here.
Physical Properties (Typical)
- Type: Cross-linking polyvinyl acetate
- State: Liquid
- Color: Honey cream
- Dried film: Translucent yellow
- Solids: 48%
- Viscosity: 4,000 cps
- pH: 3.0
- Calculated VOC: 3 g/L
- Weight/gallon: 9.1 lbs.
- Chalk temperature*: Approx 55°F
- Flash-point: >200°F
- Freeze/thaw stability: Stable
- Storage life: 24 months in tightly closed containers below 75°F
Application Guidelines
- Application Temperature: Above 55 °F
- Open assembly time: 3 to 5 minutes (70°F. / 50% RH)
- Total assembly time: 10 to 15 minutes (70°F. / 50% RH)
- Minimum required spread: 6 mils (typical), or 250 square feet per gallon.
- Required clamping pressure: Enough to bring joints tightly together (generally 100-150 psi for softwoods, 125-175 psi for medium woods, and 175-250 psi for hardwoods)
- Methods of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader, or brush.
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Bonding Strength (ASTM D-905 Test with Hard Maple)
| Temperature | Strength | Wood Failure |
|---|---|---|
| Room Temperature | 3,750 psi | 72% |
| 150°F. Overnight | 1,750 psi | 6% |
Limitations
- Titebond II Premium Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exterior doors or exotic and oily woods, please contact Titebonds Technical Support Team at 1-800-347-4583. Read MSDS before use. Keep from freezing. Keep out of reach of children.
Available Sizes
| Part # | Size | UPC | Case Qty. |
|---|---|---|---|
| 5002 | 4 Oz. Bottles | 037083050028 | 12 |
| 5003 | 8 Oz. Bottles | 037083050035 | 12 |
| 5004 | 16 Oz. Bottles | 037083050042 | 12 |
| 5005 | 1 Quart Bottle | 037083050059 | 6 |
| 5006 | Gallon Jug | 037083050066 | 2 |
| 50009 | 2.15 Gallon ProJug | 037083500097 | 1 |
| 5007 | 5 Gallon Bucket | 037083050073 | 1 |
| 5008 | 55 Gallon Drum | N/A | 1 |
Typical Ground Transit Time:
Shipping Details:
- Normal processing time for all orders is one business day unless the item is flagged as a special order or has a noted lead time. Unforeseen events may cause delays (such as closed roads, weather, war, acts of God, etc). Please note that ship times are estimates only and are not guarantees.
