Titebond White Wood Glue - 5 Gallon
$101.78
2 left on hand, additional units may have lead time
SKU
T5027
MPN
5027
MFR:
Franklin International
Safe - no solvent vapors. Water cleanup & non-toxic.
MPN
5027
MFR:
Franklin International
Titebond White Glue is an exceptionally strong, economical white glue that sets faster than most other comparable glues. Its versatile formula is ideal for general woodworking applications, as well as many other porous and semi-porous materials. Titebond White Glue provides a strong initial tack and sets fast to reduce clamp time. It provides a translucent glue line, offers excellent sandability, and is unaffected by finishes. Titebond White Glue is easy to use, non-toxic and cleans up with water.
- Fast set - Strong bond
- Excellent heat-resistance
- Safe - no solvent vapors
- Water cleanup & non-toxic
- Versatile
- Dries clear and colorless
- Sets faster than most other white glues
Physical Properties (Typical)
- Type: Polyvinyl acetate emulsion
- State: Liquid
- Color: White
- Dried film: Translucent
- Solids: 45%
- Viscosity: 7,000 cps
- pH: 4.7
- Calculated VOC: 10.7 g/L
- Weight/gallon: 9.1 lbs.
- Chalk temperature*: Approx 50°F
- Flash-point: >200°F
- Freeze/thaw stability: Stable
- Storage life: 24 months in tightly closed containers below 70°F
Application Guidelines
- Application Temperature: Above 50 °F
- Open assembly time: 5 minutes (70°F. / 50% RH)
- Total assembly time: 10 to 15 minutes (70°F. / 50% RH)
- Minimum required spread: 7 mils (typical)
- Required clamping pressure: Enough to bring joints tightly together (generally 30-80 psi for High Pressure Laminate, 100-150 psi for softwoods, 125-175 psi for medium woods, and 175-250 psi for hardwoods)
- Methods of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader, or brush.
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Bonding Strength (ASTM D-905 Test with Hard Maple)
Temperature | Strength | Wood Failure |
---|---|---|
Room Temperature | 3,550 psi | 50% |
150°F. Overnight | 1,600 psi | 15% |
Limitations
- Titebond White Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue, or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. Keep from freezing. Keep out of reach of children.
Available Sizes
Part # | Size | UPC | Case Qty. |
---|---|---|---|
15026 | Gallon Jug | 037083050264 | 2 |
5027 | 5 Gallon Bucket | 037083050271 | 1 |
5028 | 55 Gallon Drum | 037083050288 | 1 |
Typical Ground Transit Time:
Shipping Details:
- Normal processing time for all orders is one business day unless the item is flagged as a special order or has a noted lead time. Unforeseen events may cause delays (such as closed roads, weather, war, acts of God, etc). Please note that ship times are estimates only and are not guarantees.
Write Your Own Review